Orphek Helix 3000 Protein Skimmer Design vastly improves contact time in the reaction chamber while producing an enormous amount of very small micro bubbles.
The increased amount of micro bubbles results in more waste being collected per hour than any other conventional protein skimmer on the market.
Voordele
- 'N hoë spoed DC beheerbaar pomp beweeg meer water meer doeltreffend.
- Helix naald wiel ontwerp produseer baie klein mikro bel.
- Drie stuk skimmer liggaam maak skoonmaak vereenvoudig.
- Wit komponente dikteer dieselfde suiwerheid as die water die skimmer produseer.
- Hoë doeltreffendheid lae-energie gebruik.
- IC beskerming in pomp sluit pomp af as daar geen water vloei of geblokkeer stuwer.
- Lae geraas vlak.
- Beweeg meer water as konvensionele skimmers.
- Lang kontak tyd vir meer vullisverwydering.
- Beheerbaar pomp laat fine tuning van afgeroomde geproduseer gee jou presies wat jy vlugtig op soek is na en beskik oor 'n koraal voeding breek af.
- Unieke spons filter stiltes water terugkeer na die oliebak en 'n strik afval terug te keer na die oliebak.
- Minder hitte-oordrag in die akwarium.
- Getoets vir 1.6 jaar betroubaarheid te verseker.
- Resultate, verwyder meer afval as enige skimmer in sy klas meer doeltreffend.
- Produseer voedingstowwe gratis water, ideaal vir 'n uitstekende koraal groei en gesondheid.
- Verminder oorlas alge groei.
KONSTRUKSIE
Pure acrylic used for reaction chamber, riser tube, and cup. Pmma castings used for all other components. Cone shaped for improved concentration of foam to the riser tube and collection cup to provide a fast and more efficient removal of waste from your aquarium.
CONTROLLABLE DC PUMP
A controllable 3,000 L/h DC pump provides a high speed, high volume cylindrical movement of bubble rich water. With a DC pump and controller you can now take full control of your skimmer to give you exactly the skim you are looking for.
HELIX NEEDLE WHEEL
The pump impeller was designed to spiral the water/air mixture created by the needle wheel to further reduce of the bubble size created by the needle wheel. This provides a water column exiting the pump with an enormous amount of micro bubbles.
BUBBLE PLATE
The specially designed bubble plate diffuses the bubbles and reduces turbulence of the water entering the conically shaped riser tube which helps prevent premature break down of the nutrient rich bubbles entering the riser tube.
EFFIECIENT
The controllable DC pump provides a highly efficient means for moving large volumes of water with little energy cost. This also means less heat transfer into the aquarium.
Betroubaarheid en RESULTATE
The Orphek Helix Protein Skimmer has been perfected and tested for 1.6 years on a tank much larger than what it is rated for. This ensures optimum efficiency and reliability of all components and assures you a clean and healthy tank.
The new Orphek Helix Protein Skimmer removes more waste than any other skimmer in its class and will easily create a nutrient free aquarium providing ideal water conditions for coral growth and health.
TEGNIESE SPESIFIKASIES
Package : 59*48*35cm ( V.W 21kg )
Skimmer ; 340 * 290 * 550mm
Reactions chamber diameter: 220mm (8.66 inches)
Outlet diameter: 40mm (1.57 inches) PVC
Maximum air intake: 1300 L/H
Tank capacity: 800-1500L (211-396 gallons)
Installation method: Internal/sump
OPTIMUS NEEDLE DC PUMP – Model :OP 3000N
DC-3000 Controllable/25 watts, 2.5 amps at full power
Max head pressure: 3 meters (39 inches)
Energy efficient: Up to 65% savings over conventional AC pumps
IC electronic shut down protection against no water flow or blocked impeller
Feed mode provided by controller, pauses pump 10 minutes for coral feeding
Taai keramiek skag af steel dra aansienlik
Helix 3000 REVIEWS:
Orphek Helix offers a twist on the widespread DC Cone skimmer
Orphek enters protein skimmer market with the DC-powered Helix | ReefBuilders
Installasie stappe?
1. Keep reaction chamber (4) and diversion box (5) aligned before locking.
2. Place outlet hanger (9) on top of reaction chamber (4) and lock in place.
3. Put sponge on outlet pipe and secure with hanger (9).
4. Connect air silencer (8) with air line and fasten to hanger (9).
5. Connect collection cup (2) with drain tube (3) before inserting it into the reaction chamber (3) and place lid (1) on collection cup (2).
6. Connect the air line to the inlet of the water pump (6), keep outlet and reaction chamber ports aligned before installation to the diversion box (5). Be sure air line is connected firmly to the air silencer (8) and pump inlet (6).
7. A new skimmer will produce much foam during break in due to manufacturing processes. Please adjust water volume control with knurled knob on the water pipe. It should be initially adjusted so there is a very small amount of foam entering the collection cup. Air flow can be adjusted similarly with the adjustment screw on the air silencer. After the break in period (1 – 2 weeks) you can adjust the water flow and air to produce the desired skimmate. You can also adjust the pump volume with the pump controller.
8. Turn on the power by pressing “+” on controller, one light on indicates speed/RPM, continue to press the”+” button to increase the water volume you desire. Pressing “-“ button to decrease water volume.
9. Press “Feed” button for a 10 minute pause, “10 min” light will be on and pump will resume in 10 minutes. Pressing the “Feed” button again will end “Feed” mode.